Camshaft

Descrizione

Our customer produces about 12 million camshafts per year. The customer is looking for a solution to deburr the the front and the back of the oil bore automatically.

Application details

Application details

  • Oil bore: Ø2.5 mm
  • Max. deburr diameter: Ø3.2 mm
  • Material: Steel similar to St52 (approx. 700 N/mm2)

Proposed solution

Proposed solution

The solution of HEULE is the simple and efficient SNAP tool. Without any need to turn the workpiece or to stop the spindle, it frees the bore edges from the burr and produces a chamfer.

To deburr the front and back a standard SNAP2/2.5 tool with a working length of 20 mm is used.
Due to the minimal superelevation the application can be deburred with a SNAP tool.

Machining parameter:
Speed: 3000 rev/min
Cutting speed vc: 30 m/min
Working feed: 0.1 mm/rev

Customer benefits

Customer benefits

Up to now, the camshafts have been deburred manually. With the automated deburring, the piece can be machined fully on the machine.

Customer satisfaction

Customer satisfaction

The customer is very satisfied by the process capability and the deburr quality.