1. Select tool
2. Configuration
3. Overview
4. Request

Select tool

In this step, you select the appropriate HEULE tool for your application.

1.1Application
1.2Tool results

COFA

Configure the COFA tool according to your specifications.

2.1Bore diameter
2.2Deburring diameter
2.3Workpiece height
2.4Edges to be processed
2.5Workpiece specification
2.6Unevenness
2.7Material

BSF

Configure the BSF tool according to your specifications.

2.1Bore diameter
2.2Counterbore diameter
2.3Corner radius
2.4Workpiece height
2.5Unevenness
2.6Tool activation
2.7Material

DEFA

Configure the DEFA tool according to your specifications.

2.1Bore diameter range
2.2Chamfer diameter range
2.3Workpiece height
2.4Edges to be processed
2.5Shank design
2.6Material

DL2

Configure the DL2 tool according to your specifications.

2.1Machine requirements
2.2Bore diameter
2.3Deburring diameter
2.4Workpiece specification
2.5Workpiece height
2.6Edges to be processed
2.7Material

GH-K

Configure the GH-K tool according to your specifications.

2.1Bore diameter
2.2Counterbore diameter
2.3Countersink angle X
2.4Number of blades
2.5Material

SNAP

Configure the SNAP tool according to your specifications.

2.1Bore diameter
2.2Chamfer diameter
2.3Workpiece height
2.4Edges to be processed
2.5Material

VEX

Configure the VEX tool according to your specifications.

2.1Machining process with/without IC
2.2Bore diameter range
2.3Chamfer diameter
2.4Edges to be processed
2.5Twist drill bit diameter
2.6Drilling depth (max.)
2.7Material

Result

This tool corresponds to your application data. We would be pleased to advise you individually and free of charge. 

 

The tool selector shows one possible solution. As experts in deburring, we can also provide you with alternative solutions. 

Enquiry

Thank you for taking the time for a detailed enquiry. The time is well spent because, according to past experience, you will reach your goal more quickly this way. Individual consultation is our greatest asset.

4.1Contact details
How should your workpiece be processed?
entgraten-icon
Deburring

Uniform deburring on both sides in a single pass, without rotating the workpiece.

faswerkzeug-snap-icon
Chamfering

Economical forward and backward bore chamfering in a single pass.

senkwerkzeug-solo
Counterboring

Back counterboring of bores without rotating the workpiece.

bohren-fasen-werkzeug-icon
Drilling combined

Economical drilling combined with deburring, chamfering or countersinking.

Choose the tool that best suits your needs.
COFA_2500px_transparent
COFA

From bore diameter 2.0 mm: front and back deburring of even and uneven bores in one single pass

More Details
DL2_2500px_transparent
DL2

Bore diameter 1.0 mm to 2.1 mm: forwards and backwards deburring of even and slightly uneven bores in one single pass

More Details
X-BORES_2500px_transparent
X-BORES

Customer-specific deburring solutions for intersecting bores or crossbores

More Details
SNAP_2500px_transparent
SNAP

Front and back chamfering in one single pass

More Details
DEFA_2500px_transparent
DEFA

Front and back chamfering of interrupted bores – even with large burrs – in one single pass

More Details
GHK_2500px_transparent
GH-K

Countersinking of metal from Ø3 mm to Ø45 mm

More Details
BSF_2500px_transparent
BSF

Backspotfacing up to 2.3 x the bore diameter

More Details
SOLO_2500px_transparent
SOLO

Front and back counterboring  and backspotfacing in one single pass. Interrupted cutting possible

More Details
bohren-fasen-werkzeug-icon
VEX

Drilling combined with front and back chamfering in one single pass

More Details
bohren-fasen-werkzeug-icon
DCC

Solid carbide drilling combined with chamfering forwards and backwards in a single pass in the diameter range from 4.0 mm to 10.0 mm.

More Details
bohren-fasen-werkzeug-icon
Module Line

Your drill body combined with our chamfering module for simultaneous machining from bore-Ø 18.0 mm

More Details

Choose a value between 2.0 mm and 26.0 mm. For smaller diameters please switch to DL2. For larger diameters, please contact HEULE

COFA_Tool Selector_Bohrdurchmesser

Choose the desired deburring diameter ØD. 

COFA_Tool Selector_Entgratdurchmesser

Enter the workpiece height H.

COFA_Tool Selector_Werkstück Höhe

Choose the edge to process.

COFA_Tool Selector_Kanten

Choose the appropriate situation.

COFA_Tool Selector_Werkstückspezifikation 1
Level surface
COFA Tool Selector: schräge Oberfläche
Sloping surface
COFA Tool Selector: unebene Oberfläche
Uneven surface

Enter your material or material group to determine the blade’s spring strength and coating of the carbide blade.

Or

Choose a value between 6.5 mm and 21.0 mm.

BSF_Tool Selector_Bohrdurchmesser

Choose the desired counterbore diameter ØD.

BSF_Tool Selector_Senkdurchmesser

Choose the appropriate corner radius Rₑ.

 

The minimum swing length (AL) is given with the product proposal.

BSF_Tool-Selector_Eckradius

Enter the workpiece height H.

BSF_Tool Selector_Werkstückhöhe

Choose the unevenness height of the processing surface.

Choose the desired tool activation for folding the blade.

Enter your material or material group to determine the carbide blade’s coating.

Or

Choose a bore diameter range between 4.0 mm and 23.9 mm. For larger bore diameters please Contact HEULE.

DEFA_Tool Selector_Bohrdurchmesser

Choose the desired chamfer diameter ØD.

DEFA_Tool Selector_Fasdurchmesser

Enter the workpiece height H.

DEFA_Tool Selector_Werkstück Höhe

Choose the edge to process.

DEFA_Tool Selector_Kanten

Choose the shank style.

DEFA_Tool-Selector_Schaft

Enter your material or material group to determine the carbide blade’s coating.

Or
The standard DL2 is equipped with a spindle that rotates counter-clockwise. Is the machine equipped with a left-handed spindle?

Choose a value between 1.0 mm and 2.1 mm. For larger bore diameters Ød please switch to COFA.

DL2_Tool Selector_Bohrdurchmesser

Choose the desired deburring diameter ØD.

DL2_Tool Selector_Entgratdurchmesser

Choose the appropriate situation.

DL2_Tool Selector_Werkzeugspezifikation 1
DL2_Tool Selector_Werkzeugspezifikation 2

Enter the workpiece height H.

DL2_Tool Selector_Werkstück Höhe

Choose the edge to process.

DL2_Tool Selector_Kanten

Enter your material or material group to determine the blade’s spring strength and coating of the carbide blade.

Or

Choose your bore diameter Ød.

GHK_Tool Selector_Bohrdurchmesser

Choose the maximum counterbore diameter ØD.

GHK_Tool Selector_Senkdurchmesser

Choose the counterbore angle X.

GHK_Tool Selector_Senkwinkel

Choose the desired number of blades.

Single cutters require a stable machine and workpiece clamping setup.

3 cutters allow higher working feed rates.

Enter your material or material group to determine the blade’s spring strength and coating of the carbide blade.

Or

Choose a value between 2.0 mm and 37.5 mm. For smaller bore diameters Ød, please switch to DL2. For larger diameters please Contact HEULE .

SNAP_Tool Selector_Bohrdurchmesser

Choose the desired chamfer diameter ØD. If the bore has a thread, please contact HEULE for a threading tool.

SNAP_Tool Selector_Fasdurchmesser

Enter the workpiece height H.

SNAP_Tool Selector_Werkstück Höhe

Choose the edge to process.

SNAP_Tool Selector_Kanten

Enter your material or material group to determine the blade’s spring strength and coating of the carbide blade.

Or
Would you like to use internal coolant (IK) for the machining process?

Choose the appropriate bore diameter range between 5.0 (without IK), or 6.0 (with IK) and 11.49 mm

VEX_Tool Selector_Bohrdurchmesser

Choose the desired chamfer diameter ØD.

VEX_Tool Selector_Fasdurchmesser

Choose the edge to process.

VEX_Tool Selector_Kanten

Choose the desired bore diameter Ød for the twist drill bit

VEX_Tool Selector_Bohrdurchmesser

Choose the maximum drilling depth T.

VEX_Tool Selector_Bohrtiefe

Enter your material or material group to determine the blade’s spring strength and coating of the carbide blade.

Or
Optional information
Your request has been successfully sent
A copy has been sent to your email address. We will contact you as soon as possible.
You need an individual solution
There is no standard tool for your requirements. We would be happy to check whether an application-specific tool is suitable. We look forward to your enquiry.
To the enquiry form